![background image](http://html.mh-extra.com/html/oricom/m500/m500_user-manual_1650625009.webp)
7
GettInG to KnoW YoUR PHone
Display Icons and Symbols
The LCD display gives you information on the current status of the
telephone.
Steady when the handset is in range of the base. Flashes
when out of range of the base or not registered to the base.
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
Indicates that Speakerphone is being used.
Indicates that your answering machine (TAM) is on and
flashes when there is a new message.
Indicates that the ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is
sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message. (This is
a Caller Display service and is not usually available from UK
network providers.)
Indicates when the battery is fully charged. While icon
flashes when the battery s charging. Internal block icon
flashes when the battery is in final charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
Indicates when there are more characters or numbers in
front of those being displayed.
Indicates when there are more characters or numbers after
those being displayed.
Press the MENU/OK key to access the main menu.
Press the MENU/OK key to confirm the current selection.
Indicates new TAM message / new call in TAM message list
/ call list.
Indicates more options available in lists, above or below.
Press the C/MUTE key to start an intercom call.
Press the C/MUTE key to go back to the previous menu level
or cancel the current action.
Press the C/MUTE key to clear a character, stop the alarm, or
mute/unmute the microphone during a call.