7
5. Attach end(s) of the cord(s) to the outlets marked "SENSOR" on the
back of control unit (as shown in illustration 4 and 5). When using one
sensor pad, attach to any “SENSOR” outlet.
PLEASE NOTE
: Do not attach any cable to the blocked socket, marked
"DO NOT USE".
Cable
Cable
Bed/Crib
base
Control unit holder
Control
Unit
Illustration 4
6. Should the design of the cot not allow proper installation with the
control unit holder, please use the supplied hanging hook (as shown in
illustration 5). Hang the control unit from the bottom edge of the cot or
affix the hook with a screw (not supplied) to the bottom edge of the cot
and hang the control unit from the bottom edge of the cot.
Remove batteries when not in use
Sensor
Do not use
Sensor
Slot
Illustration 5
Remove batteries when not in use
Sensor
Do not use
Sensor
Slot
Optional Hanging hook
Installation
