8
7. Press control unit holder or hanging hook firmly into slot in back of
control unit as shown in illustration 5 and 6.
Remove batteries when not in use
Sensor
Do not use
Sensor
Slot
Blocked socket
DO NOT USE
“Sensor”
socket
Battery
cover
Opening
recess
Speaker
Illustration 6
8. Place mattress firmly on top of sensor pads. When using with a slat
based cot, ensure the sensor pads are stable & supported adequately.
If the mattress cannot be in direct contact with the sensor pads, or if
the cot base is soft or padded, place plywood (not supplied) on the cot
base, place the sensor pads on the plywood and place the mattress
firmly on top to enable full contact of the sensor pads with the
mattress.
IMPORTANT WARNING: To avoid possible danger of strangulation
from cords, keep the cords out of reach of children. Ensure that
excess cords are secured with the included cable tie.
Installation
