background image

6

4.3 Recording a personal memo

A memo is a personal message that you record by directly on the AM880,
without calling in.
1.

Press and hold 

MEMO/2 WAY 

button and the AM880 beeps. The

LCD shows ‘

MEMO RECORDING

’ and the counter starts counting

up.

2.

Speak clearly at a distance of about 15 cm (6 inches) from the
microphone.

3.

Release the 

MEMO/2 WAY

 button when you have finished speaking.

The MEMO icon will be lit on the LCD.

4.4

Playing messages

The Message LED flashes after the AM880 records new messages,
recorded memos, or two-way phone conversations.
1.

To listen to all messages, memos, and two-way conversations, press

PLAY/PAUSE

 button. The AM880 plays each new message in

sequence and announces the date and time it was recorded.

2.

During message playback:

Press 

 / OGM 

button to repeat the current message.

Press and hold 

 / OGM 

button

 

for approx. 2 seconds to repeat

the previous message.

Press 

 / 

TIME CHECK 

button to skip forward to the next

message.

Press 

 / 

TIME CHECK 

button several times in succession to

skip multiple messages.

Press 

PLAY/PAUSE

 button to pause, press 

PLAY/PAUSE

 button

again to resume.

To stop message playback, press 

ON/OFF/STOP

 button.

3.

After playing all messages, the AM880 sounds a beep and then
returns to answer-ready mode. The Play LED lights solid and all
messages are saved.
To replay the messages, press 

PLAY/PAUSE

 button.

4.5

Adjust the speaker volume

The integral loudspeaker makes it possible to listen in to incoming calls
without speaking to the caller.
Press   or   button to adjust the speaker volume. If you do not want to
listen in to the incoming calls, set the volume right down by repeatedly
pressing the  button.

Summary of Contents for AM880















Reviews: