background image

13

2LMB98YY

If the fault is still present, connect another telephone (if available) to the
telephone socket. The results will show you whether the fault lies with
this product or with the telephone line.  If this product is working correctly
the fault is on the telephone line. Please contact your network operator
for assistance

In the case of technical problems with this product please consult our
website for further information or send us an email for a prompt response
to your enquiry.

Warranty information

This product is covered by a 12 month warranty against defective
workmanship or parts, effective from the date of purchase.

The warranty does not extend to damage caused by misuse, negligence,
excessive voltage, faults on the telephone line or lightning. This warranty
in no way affects your statutory rights. Full details of the warranty are
contained in the enclosed warranty card.

Technical support

In the unlikely event of a fault during this period, please consult our
website for assistance or send us an email for a prompt response to
your enquiry. If the product is then found to be faulty you will be asked to
return it directly to us with a copy of the purchase receipt.

For further information about the Oricom range of products please visit
our website.

Australia

Oricom International Pty Ltd
ABN 46 086 116 369
Locked bag 658
South Windsor, NSW 2756

Customer support

Email: [email protected]
Web:  www.oricom.com.au
Fax: (02) 4574 8898
Ph:  1300 889 785

New Zealand

Atlas Gentech (NZ) Ltd,
Private Bag 14927,
Panmure,
Auckland

Customer Support

Email:
[email protected]
Fax (09) 5742722
Ph: 0900 50025 (Toll Call)

Summary of Contents for AM880















Reviews: