ORGTECHNICA ELKA MICRO 04 Instruction Manual Download Page 10 | Manualshive

Page: 10 / 63

background image

10

2.4. BLOCK MEMORY

In the block

MEMORY

are stored the values of the programmed

parameters, the current information when working with the cash register.

After switching off the cash register memory is supplied by a build-in

accumulator, located on logic plate. A storage of the information for more than
1500 hours after switching off the cash register is guarantied.

2.5. FISCAL MEMORY

The fiscal memory is energy independent, constructively separate and

sealed block in the case of the cash register. In every daily financial report with
clearing in the fiscal memory a BLOCK DATA is written, containing the necessary
information for realization the turn-overs by every taxation group with
accumulation. This information could be printed in regime

“REPORTS OF

FISCAL MEMORY” .

The capacity of fiscal memory provides work of the cash

register for a period of 6 years/1850 records/. The information recorded in the
fiscal memory could not be changed. A record of data is accomplished after
setting the electronic cash register with fiscal memory into exploitation. The cash
register should be set into exploitation after starting activity of the trade
project.After fiscalization of the cash register with fiscal memory every attempt to

work without fiscal memory is blocked and a message

“P2 ”

is shown on the

indication.

3. PREPARATION FOR WORK OF THE CASH REGISTER

Before setting the cash register with fiscal memory into exploitation a

control check-out is made for eventual mechanic damages.

In case that the cash register has been transported in conditions of low or

high temperature when switching on, it should be compulsory left to get
acclimatized for 4 hours in the package and 1 hour out of it.

The place for installation of the cash register should not be exposed to

direct impact of heat sources.

The mounting of the cash register should be accomplished at a height,

conformable to the requirements for convenient work at a proper corner on
observation of the indications by the operator and the customers.

The rooms in which the cash register will be used should be with normal

fire hazard regarding Order 2/ПCТН/ and with normal dashing off.

PDF created with FinePrint pdfFactory trial version

http://www.fineprint.com

«
...
8
9
10
11
12
...
»

Summary of Contents for ELKA MICRO 04
































































Reviews:

No comments

Related manuals for ELKA MICRO 04

MA-1650-4 Series

Brand: TEC Pages: 228

Brand: GINEERS Pages: 2

Brand: Safescan Pages: 16

Brand: MP Filtri Pages: 48

Brand: ECR Pages: 30

Brand: Eaton Pages: 8

Brand: Magner Pages: 20

Brand: QUORION Pages: 4

Brand: Sam4s Pages: 35

isiLine ISI30 Series

Brand: ivo Pages: 16

Brand: Royal Pages: 134

Brand: QUORION Pages: 4

Brand: microSYST Pages: 7

Brand: WA Library Supplies Pages: 4

Brand: Lionel Pages: 2

Brand: HEIDENHAIN Pages: 18

Brand: HEIDENHAIN Pages: 25

Brand: HEIDENHAIN Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands