16
For parameters
30
and
31
it is necessary to press key
“TL”
for the
second time.
It is not compulsory to choose parameters consecutively.
Programming all the parameters is not compulsory.
As certain parameter could be chosen only for a reference or check-out.,
without changing its value or its meaning (Key
“STL”
is not used in operation
consequences).
Regarding the consequence of operating, parameters are divided
conditionally in three rigimes of work.
First REGIME
– it covers parameters with numbers from
2, 3, 7, 11,
12, 13, 14, 15, 16, 17, 20 and 21.
Second REGIME
– it covers parameters with numbers from
19, 22, 23,
24, 27, 28, 29 and 37.
Third REGIME
- it covers parameters with numbers
30
and
31
.These
parameters include number
L /
number of department or assortment/ and every
L
includes several characteristics
M.
Forth REGIME
–
covers parameter
33.
When programming (setting a new value) of parameters
2, 14, 22, 28
and 30
the following registers should be cleared:
- cash and department (key
“TL”
);
- assortments (key
“PLU”
);
- operators (key
“+%”
):
For parameters
30
and
31
it is not necessary to report the cash register
with the fiscal memory, if before programming of the concrete department or
assortment no accumulation has bee done in it.
4.2.2 REACTION AT WRONG PROGRAMMING OF PARAMETER
During the process of programming, the usage of a key different from the
participating ones in the programming of the chosen parameter, is
WRONG
OPERATION
, accompanied by a long sound signal.
Correction of wrong entered value of parameter is accomplished by one of
the following ways:
* if the operation is not closed yet with key
“TL”
is entered the new value
and then press key
“STL”
;
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
