18
EN
Barometric data is shown in 2 areas at the bottom of the
display. The upper area shows a 24-hour bar chart.
The lower area shows current and historical readings.
SELECT MEASUREMENT UNIT
Slide the
mb / inHg
switch (in the clock battery
compartment), to change the display unit.
VIEW BAROMETER HISTORY
Navigate to the Barometer Area. Then press
HISTORY
repeatedly to scroll through the measurements. The
number shown in the HR box indicates how long ago
each measurement was taken (e.g. 2 hours ago, 3 hours
ago, etc.).
ACTIVATE ALARM
Navigate to the Clock Area, then press
ALARM
/ to
switch to Daily Alarm or Pre-Alarm view. To activate or
deactivate the alarm, press
UP
or
DOWN
.
When the alarm time is reached, the backlight will be on
for 8 seconds and crescendo alarm will sound for
2 minutes. Press any key (except snooze) to silence
the alarm. It will sound at the same time the next day.
SNOOZE
Press
SNOOZE / LIGHT
to temporarily disable the alarm
for 8 minutes. or will blink while snooze is on.
BAROMETER
This product tracks fluctuations in barometric pressure
to provide the weather forecast, and the current and past
24 hours barometric pressure history measurements are
recorded by the main (indoor) unit.
VIEW BAROMETER AREA
Press
SELECT
to navigate to the Barometer Area.
If
is
NOT
shown, press
MODE
.
BAR989HG_M_EN_op.p65
2005.9.17, 10:29 AM
18
