16
EN
Clock radio reception disabled:
SET CLOCK
You only need to do this if you have disabled clock radio
signal reception, or if you are too far from the radio signal.
1. Press
SELECT
to navigate to the Clock Area. will
show next to the Area.
2. Press and hold
MODE
for 2 seconds.
3. Select the time zone offset hour (+ / -23 hours), 12 /
24 hour format, hour, minute, year, date / month
format, month, date and display language.
4. Press
UP
or
DOWN
to change the setting.
5. Press
MODE
to confirm.
The language options are (E) English,
(F) French, (D) German, (I) Italian, and (S) Spanish. The
language you select determines the weekday display.
BAR989HGA only - If no time zone hour offset
is set, the time shown will be Pacific Time. To change to
another US time zone, select an hour offset accordingly.
The time zone options and their related hour offset times
are Pacific (UTC-8), Mountain (UTC-7), Central (UTC-
6) and Eastern (UTC-5).
NOTE
To force a manual search for the clock signal
reception, press and hold
SEARCH
on the sensor for 2
seconds.
TURN CLOCK RECEPTION ON / OFF
If you wish to manually set the clock, you must first
disable the clock radio signal reception feature. To do
this, navigate to the Clock / Alarm Area. Then, press
and hold
DOWN
on the main unit for 2 seconds. To
enable it, navigate to the Clock / Alarm Area, then press
and hold
UP
for 2 seconds.
Clock radio reception enabled:
ICON
MEANING
The unit has lost contact with the
remote sensor but the time is
synchronized.
The unit has lost contact with the
remote sensor and the time is not
synchronized.
The unit cannot reach the remote
sensor.
NOTE
NOTE
BAR989HG_M_EN_op.p65
2005.9.17, 12:24 PM
16
