13
EN
REMOTE SENSOR
This product is shipped with the RTGR328N/
RTGR328NA Thermo Hygro Sensor. The main unit can
collect data from up to 6 sensors (5 Thermo / Hygro
Sensors and 1 UV Sensor). Additional sensors are
compatible as follows:
•
BAR989HG only - THGR328N / THGR328NA 5-
Channel / THGR228N 3-Channel / THWR288 3-
Channel
•
BAR989HGA only - THGR238NA 5-channel /
THGR238NA 3-channel / THWR288A 3-Channel
(Additional sensors are sold separately. Contact your
local retailer for more information.)
The sensor collects and transmits temperature and humidity
readings, along with time and date information. This product
is designed to automatically synchronize the time and date
once it is brought within range of a radio signal:
•
DCF-77 generated from Frankfurt, Germany for
Central Europe
•
MSF-60 generated from Rugby, England
•
WWVB-60 generated from the atomic clock in Fort
Collins, Colorado.
The sensor collects the radio signals whenever it is within
1500 km (932 miles) of a signal.
SET UP THERMO / HYGRO SENSOR
1. Open the battery compartment with a small Phillips
screwdriver.
2. Insert the batteries.
3. * RTGR328N only - Set the channel and radio signal
format. The switches are located in the battery
compartment. If you are using more than one sensor,
select a different channel for each sensor. Slide the
EU / UK
switch to the appropriate setting.
* RTGR328NA only - Set the channel. The switch is
located in the battery compartment. If you are using
more than one sensor, select a different channel for
each sensor.
4. Press
RESET
. Then set the temperature unit to your
preferred setting
°
C /
°
F
.
5. * RTGR328NA only - Press
ZONE
to select the US
time zone (P for Pacific, M for Mountain, C for Central
or E for Eastern).
6. Close the battery compartment.
BAR989HG_M_EN_op.p65
2005.9.17, 10:29 AM
13
