3. OPERATION
FILLING THE CLEAN WATER TANK
Press the Clean Water Tank latch on handle.
Angle the Clean Water Tank out to remove.
Turn water cap counter-clockwise to remove.
Fill Clean Water Tank with hot tap water.
DO NOT FILL WITH WATER ABOVE 140˚F (60˚C).
USE ONLY ORECK CLEANING PRODUCTS INTENDED FOR USE WITH THIS MACHINE. (SEE THE “CLEANING PRODUCTS” SECTION IN THIS
MANUAL FOR DETAILS.) THEY ARE SPECIALLY FORMULATED FOR USE WITH YOUR CLEANER. NON-ORECK CLEANING SOLUTIONS MAY
HARM THE MACHINE AND VOID THE WARRANTY.
WARNING!
!
!
CAUTION!
!
!
NOTE: Using more than the recommended amount of cleaning solution may cause excessive foaming.
