34
How to clean the fuel filter:
Replace the fuel lines every season or as necessary. They cannot be dismantled or cleaned.
Please be careful of the direction of insertion when changing fuel lines. For more information,
please contact your dealer.
How to adjust the tire pressure:
Check the tire pressure of the front and rear wheels according to the following table.
If the tire pressure is not equal on each side, the machine may veer to one side.
Tire size
Pressure
Front wheel
4.00-7
17.5 psi (120 kPa)
Rear wheel
17 x 8.00-8
23.2 psi (160 kPa)
How to clean engine coolant:
(1) Remove mud or grass from the rotation screen and
the top of the engine cover before each use.
(2) Open the fastener key that holds the engine cover,
hold the cover up, and release the air inside.
(3) After operation, please keep the cover and the key
fastener in place, as they are removed only for
cleaning.
For opening the zipper, please refer to the following “How to adjust each belt, wires,
and rods”.
When releasing air, it is easier to discharge grass and dust when you hold up the
engine cover and seat. (Please avoid using high pressure water washer. It may cause
engine trouble.)
At the same time, remove the grass that is piled on the edges of the HST fan cover. If
you keep using without removing grass, the HST oil temperature rises, so that the HST
will not operate at its optimum performance level.
Remove each part after the engine has cooled down. After cleaning, do not start the
engine until each part is installed.
If you keep working while grass is piled on the engine cooling system, it can cause
overheating, but also the engine temperature will increase and may cause a fire.
The rotating screen rotates with the engine. Please stay away from the rotating screen.
It may cause injury.
Rotation
screen