32
B&S
How to Lubricate Each Part:
Be sure to lubricate each part with grease or lubricating oil (#30) for every 30 hours of use.
If you neglect lubrication and allow oil to run out, machine operation will become sluggish and
the machine could be damaged.
How to Inspect the Machine, and Adjust Each Part:
How to clean the air filter
If you continue to use the machine with the air filter and recoil starter clogged with weeds, etc,
exhaust temperature will increase and could ignite the fuel, resulting in a fire. Be sure to
periodically clean these parts.
Do not start the engine with the air filter removed. Dirt and dust will be sucked into the engine,
causing engine trouble and abnormal wear and tear.
(1) Release the wing nut and the air cleaner cover.
(2) Remove the
foam and paper elements. (Be careful
not to put dust or debris into the carburetor.)
(3) Wash the foam element with a pH neutral detergent.
After washing, be sure to squeeze out all the water
and allow it to dry.
(4) When cleaning the cartridge (paper elements), tap
lightly or blow dust and debris from the inside of the
filter.
(5) Wipe dust and debris from the inside of the case and reassemble back to its original
position.
If the paper element is very dirty, replace with a new paper, or wash with liquid soap,
rinse well and allow it to dry.
When cleaning, do not pull or crumple the
foam element. This causes damage.
When you tap the paper element, be careful not to damage the paper.
Do not rub the paper with a brush.
When drying, do not put hot air in to the paper element. It may cause damage to the glue.
Dry at a low temperature, or let air dry.
King
pin,
Center
pin
(grease)
Link
fulcrums
(8)
Parking
brake
pedal
NOTICE
Clip
Cover
Knob
Plate
Body
Kit NO 5050