27
While working, if you hit an obstacle, stop the engine immediately and if there is
damage to the machine, please repair immediately. If you avoid repairing the machine,
it can cause injury or accident.
When the grass is wet, or when it rains, the machine may slip and this is dangerous. In
addition, cut grass will get stuck inside the blade cover, and it can lead to engine
damage. In this case, stop working, and wait until the grass is dry. Working in rainy
weather is very dangerous.
The blade comes to the inside of the cover (both left and right sides) during the blade
rotation. Therefore, during this procedure, do not put your hands or feet in the blade
cover.
Do not put grass or leaves into the engine. The accumulation of these combustible
materials may cause fire or damage of the machine.
If the machine stalls out frequently because of the amount of grass, slow down the
speed, or raise the cutting height and cut several times.
When working on a gentle slope, make sure that the engine plug always faces
upward.
Cutting with the engine plug down may cause the engine oil to burn, and the engine
may emit white smoke.
It is possible to move the cutting height lever in order to disengage the blade lever,
but you should only do this in an emergency. If you do this often, the blade belt gets
sudden shock and becomes damaged. For non-emergencies, refer to above (#8)
operation.
It is not possible to operate the blade clutch lever when the cutting height adjustment
lever is all the way in the up position.
Normal stopping is performed by the shift lever. If the parking brake pedal is engaged
in an emergency situation, the machine will stop suddenly. At the same time, the shift
lever will return to the neutral [N] position.
When you finish working, stop the engine and remove the key.
NOTICE