manualshive.com logo in svg

OreaTEL GT48, User Manual, Page: 32 / 55

Share
Download
OreaTEL GT48 User Manual Download Page 32

www.greatel.net

                                                                                                                                                              - 32 - 

Step 4: In the Registration field, select on or off to indicate whether to register the phone number or not. on 

means to register; off means not to register. 

  Step 5: In the Display Name field, enter the content to display in the outgoing calls. You can enter up to 30 

characters. FXS lines that have name display capability can display what is entered here. 

Step 6: In Password field enter the registration password if you selected on in Step 4.   

The functions beyond this point only apply to SIP protocol. When using MGCP protocol, there is no need to set 
them up, as the set up does not work. 

Step 7: In Originating Restriction field, select on (to indicate the line can only receive calls but not initiate calls) 

or off (no restriction). 

Step 8: In Call Waiting field, select on (enable) or off (disable). 

Step 9: In Call Holding field, select on (enable) or off (disable). 

Step10: In Call Forward field, select on (enable) or off (disable). 

Step11: In Caller ID field, select on (enable) or off (disable). 

Step12: In CID On Call Waiting field, select on (enable) or off (disable). 

Step13: In Anonymous Call field, select on (enable) or off (disable). 

Step14: In Hotline field, select on (enable) or off (disable). 

Step15: In Hotline Delay field, select on (enable) or off (disable). 

Step16: In Do Not Disturb field, select on (enable) or off (disable). 

Step17: In Speed Dial field, select on (enable) or off (disable). 

Step18: In Distinctive Ring field, select on (enable) or off (disable). 

Step19: In All Forward field, enter a number to forward all calls if you set Call Forward to on. 

Step20: In Busy Forward field, enter a number to forward calls when the line is busy (if you set Call Forward to 

on). 

Step21: In Hotline Number field, enter a hotline number if you set Hotline to on. 

Step22: In Speed Dial List field, enter the Speed Dial Code number (any two digits between 20 and 49) plus the 

actual number. Multiple entries are separated by /. Example:21-68640585. 

Step23: In Fashion Ring ID field, the number set up in section 

5.7.3  Setting up the Feature

 Codes

 

will display. 

You can also enter a different number here to overwrite the previous number. 

Summary of Contents for GT48
























































Reviews:

No comments