www.greatel.net
- 23 -
GT48 allows multiple users to log on at the same time. Only the first user logged on with the highest privilege is
able to change configurations. The rest can only monitor configurations.
Note1: After a user logs on, he/she will be automatically logged off if there is no activity for more than 10 minutes.
After that, a user needs to log on again.
Note2
:
After complete configuration, a user must completely log out instead of just closing the browser. This will
elevate the access level of the next logged on user so he/she will be able to change the configurations.
5.2 System Configuration
Step 1: Click System Config link on the left of Figure 5 -1, and you will see the following:
Figure 5 – 2
Step 2: The Software Version field displays GT48 software version. The system automatically updates this field
whenever a new software version is loaded. You can not change this field.
Step 3: The Hardware Version field displays GT48 hardware version. The system automatically reads hardware
version and updates this field. You can not change this field.
Step 4: The DSP Version field displays GT48 DSP software version. The system automatically updates this field
whenever a new software version is loaded. You can not change this field.
Step 5: In the RTP Port Min field, enter the minimum value of the RTP port.
Step 6: In the RTP Port Max field, enter the maximum value of the RTP port.