www.greatel.net
- 28 -
Figure 5 – 5
Step 2: In the SIP Port field, enter the SIP local port number. The default value is 5060. Local port number could
be set at will, as long as it doesn’t conflict with the other port numbers in the system.
Step 3: In the SIP Proxy field, enter the address and port number of the Proxy Server. The address and port
number are separated by a colon. The address can be either IP address or domain name. When using
domain name form, it is necessary to invoke DNS service in the “Network Config” page and set the
parameter of DNS server. The complete and valid setting is as follows: 201.30.170.38:5060 and
softswitch.com:5060.
Step 4: In the SIP Registrar field, enter the address and port number of the SIP Registrar. The address and port
number are separated by a colon. The address can be either IP address or domain name. When using
the domain name, it is necessary to invoke DNS service in the “Network Config” page and set the
parameter of DNS server. The complete and valid setting is as following: 201.30.170.38:5060 and
regster.com:5060.
Step 5: In the Registration Expires(s) field, enter the valid time (in second) for SIP re-registration. The default
value is 30.
Step 6: In the SIP Domain Name field, enter the SIP domain name. If the field is left empty, GT48 will use the
address of the Proxy Server as the domain name. It is recommended that you do not use a private
network IP address in this field. The valid configuration is as follows: 210.25.185.33 and test.greatel.net.
Step 7: In the Authentication Mode field, use the drop down menu to make a selection. Per Endpoint means to
register and authenticate according to each individual line; Per Gateway Reg means to register and
authenticate according to the gateway; Per Gateway Auth means to register according to each
individual line, and to authenticate according to the gateway.
Step 8: Set the User Name field if registered as Per Gateway Reg or Per Gateway Auth; if registered as Per
Endpoint, do not set this parameter.
Step 9: In the Password field enter soft-switch authentication password, which can be digits or characters. The
password is case sensitive. If registered as Per Gateway Reg or Per Gateway Auth you need to set this
parameter; if registered as Per Endpoint, you do not need to set this parameter.
Step10: Click the Submit button.