User Guide | MyEye 2.0 |
Page 7
The mount is now attached to the glasses
frame and can be left there permanently. The
glasses can be folded with the mount in place.
See www.orcam.com/tutorials for a video
tutorial to help you attach the mount.
Note:
If you prefer to attach the OrCam MyEye
to the left arm of the glasses frame, the mount
tab must face forwards during assembly, to
ensure the magnets are properly aligned.
Charging your OrCam MyEye.
•
Attach the OrCam charger cable to the USB
outlet on the back of the OrCam MyEye.
•
Plug the charger into an electrical socket.
The OrCam MyEye fully charges in 40 minutes.
Charge the device when not in use so it is
ready when you are.
OrCam strongly recommends using only the
original OrCam charger provided.
Turn on your OrCam device.
•
Press the Power button on the inside of the
OrCam MyEye for about 2 seconds.
•
The LED light on the inside of the device will
turn green.
•
After about one minute you will hear, “OrCam
Version 8 is ready. Battery is [this many] percent
charged.”
If you did not hear the phrase, “OrCam is ready,”
or you are not sure that the OrCam MyEye is on,
touch the touch bar. If the device is on, you will
hear a response.
