User Guide | MyEye 2.0 |
Page 28
Safety.
Before using the OrCam device, read these precautions carefully to avoid
dangerous situations and to ensure ideal performance of your device.
Handle your OrCam device with care. It can be damaged if dropped,
burned, punctured, or crushed. Do not open the device.
The OrCam device is designed to work in ambient temperatures between
32°F and 104°F (0°C and 40°C) and in normal conditions (Relative
Humidity of 10% to 90% RH and Atmospheric Pressure of up to 2000m
above sea level (700hPa)). The device can be damaged if used outside
of this range. Store and transport in a cool, dry place (32°F to 104°F (0°C
to 40°C) and Relative Humidity of 5% to 90% and atmospheric pressure
of 700hPa to 1060hPa)).
The OrCam device is water resistant but not waterproof. This means
the device can withstand light rain or drizzle for short periods of time,
although it is not recommended. Do not use the OrCam device in heavy
rain, at the beach or swimming pool, or in or near a bathtub or shower. Do
not submerge the OrCam device in any liquid. IP Code: IP22.
Clean your device if you feel it is dirty or transferred between users.
Never touch the camera lens with your finger. Clean the lens only with
the supplied microfiber cloth and eyeglass cleaning fluid. Do not use
any abrasive materials. Do not expose the device to chemicals, such as
household cleaners, aerosol sprays, solvents, alcohol, or ammonia. If
you experience an allergic reaction to any of the elements of the OrCam
device contact a medical professional.
Should you have a problem operating the OrCam device, if the case
or lens is cracked, or if you believe there is something wrong with the
device, please contact support and do not attempt to repair it by yourself.
Only qualified OrCam personnel may repair or service your device.
Unauthorized repairs may void your warranty.
Do not attempt to replace the battery; you may damage it, which could
cause overheating and even injury. The battery is designed to last for
three years of average use (three charging cycles per week on average)
after which it may need to be replaced. Use only the charger supplied with
your OrCam device. Using another charger may void your warranty and
could cause severe injury.
Do not force a connector into a port or apply excessive pressure to a
button. This may cause damage that is not covered under the warranty. If
a connector does not insert easily, check for obstructions in the port and
verify that you have the correct connector for that port. Do not combine
with software, hardware, or other equipment not supplied by OrCam.
Exposing the device to magnetic fields may damage the unit or erase
your data.
When using the OrCam device or charging the battery, it is normal for
the device to get warm. If the unit becomes excessively hot, leaks, or
gives off a burning smell, turn the device off immediately and contact
OrCam Support.
OrCam MyEye meets the standard requirements in the US and EU for
Class 1 medical devices. OrCam recommends keeping the OrCam
MyEye’s magnets at least 6 in. /15 cm away from any implantable cardiac
equipment. If you have specific questions about use alongside an internal
pacemaker and/or defibrillator, please consult your medical professional.
