![background image](http://html.mh-extra.com/html/orbitalum/rpg-4-5/rpg-4-5_operating-instructions-manual_1648245019.webp)
(18.12.17) OC_RPG_L_BA_790038762_01_EN
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
| 19
RPG 4.5 (S), RPG 8.6
| Operating instructions
Setup and assembly
8.1
Fitting the multifunctional tool (MFW) and the tool holder (WH)
1. Screw the multifunctional tool (MFW) onto the tool holder using a Torx screwdriver.
2. Insert the tool holder with fitted MFW laterally into the guiding groove and position it.
3. Press the tool holder against the bearing surface of the tool support and, at the same time, tighten the screw using
the Allan key (1).
NOTE
To facilitate the adjustment process, the tool support of the RPG 4.5 (S) has been provided with
4 visible marks for 1", 2", 3" and 4" tubes (see the illustration below). At the RPG 8.6 there are 5 vis-
ible marks for 4", 5", 6", 7" and 8" tubes.
1
1"
2"
3"
4"
Summary of Contents for RPG 4.5
Page 30: ......