Orbit UM3296D, Owner'S Manual

Page: 21 / 30

20
“ C
ONSOLE
I
NSTRUCTIONS –
P
ROGRAM (P9 ~ P12) ”
“ E. DURING WORKOUT, ALWAYS MONITOR YOUR CURRENT HEART RATE STATUS ”
NOTE for HEART RATE:

You must place both of your hands on the Pulse Sensors located on the Handlebar .
Your pulse will be displayed approximately few seconds after the heart symbol “ ” is
displayed.

If you do not place your hands correctly and a few seconds pass without a pulse input,
the console will turn off the pulse circuit. The console will then display an error
message “HP”. Place your hands back on the Pulse Sensors correctly, the pulse
readout will appear again.
“ F. DURING WORKOUT, THE TORQUE/TENSION LEVEL IS EASILY CHANGED AT ANY TIME ”
UP or DOWN
button: You can slightly change the workout profit’s torque/tension level at any
time during workout by pressing
UP or DOWN
button.