Orbit UM3296D, Owner'S Manual, Page: 8 / 30

7
“ A
SSEMBLE
I
NSTRUCTIONS ”
S
TEP 3
–
Console Assembly
a. Place the Console Assembly (32) onto the iron plate of the Upright Post Assembly (5). Refer to FIG. 1 , fix the
Console Assembly (32) with four Bolts, Hex Flange (M8xp1.25x.16mm)(81) and two Self-Tapping Screw, Truss
Head (M4x12mm)(69).
b. Fully secure four Bolts, Hex Flange (M8xp1.25x.16mm)(81) and two Self-Tapping Screw, Truss Head
(M4x12mm)(69) that attach to the Console(32,33) and the Upright Post Assembly(5).
c. Connect the Upper Connection Wire (94) to the Lower Connection Wire (95). Do not pinch the wires.
NOTE: After connecting the wires, slightly and gently pull two sides of wires to test and make sure whether the
wires are fully connected.
Small Tip
: Attach ALL screws and bolts to the assembly parts first before secure.
**Please do not secure the bolts unless you make sure ALL Bolts go into screw holes of Console and
Upright Post Assembly**