17
COMPUTER INSTRUCTIONS
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the
CONSOLE
MONITOR(19).
2. The
CONSOLE MONITOR(19)
operates with two C batteries
(1.5V each), the batteries are not included. Refer to the
illustration to install or replace the batteries.
C Batteries
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled according to
all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
BLUETOOTH APP:
- As long as the screen is turned on from sleep mode. Bluetooth will be on and can be
discovered on your phone or tablet
- Connectivity to apps is through FTMS protocol, can connect to any apps using this
protocol to connect. Such as Kinomap or Zwift.
- When console is connected to an app the screen will display “bt” at the bottom left of
screen. All other buttons will be of no use until disconnected from Bluetooth app.
BLUETOOTH SOFTWARE UPDATE:
The console software can be updated via Bluetooth. Please consult your dealer to see how
to update and check if you have the newest software installed.
CONNECT TO KINOMAP:
1. Press any button or row the machine to activate the console. When the console is activated,
Bluetooth is always on, can connect anytime.
2. Open the app and press “More” on the button corner.
3. Press “Equipment Management” then press “ + ”, and select “ Rowing Machine ” category.
4. Search for “FTMS” and select “Anplus-XXXX” in the connection option list. Press “Enable”, then
press “Allow”.
5. Select your equipment, and press “ADD NEW EQUIPMENT”.
6. Enjoy the Kinomap experience.
CONNECT TO ZWIFT:
1. Press any button or row the machine to activate the console. When the console is activated,
Bluetooth is always on, can connect anytime.
2. Open the app and login to your account.
3. Select your equipment catergory and choose your exercise choice.
5. Press on “POWER SOURCE”, select your bluetooth equipment “Anplus-XXXX”, press “OK”
6. Enjoy the Zwift experience.
BLUETOOTH CONNECTION
