18
OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
There is a
DAMPER(42)
built into the
RIGHT
FAN
SHROUD(43).
Move the Indicator in the
DAMPER(42)
to point to
the numbers on the
RIGHT
FAN
SHROUD(43)
to adjust the
load. There are settings from 1 to 10. Setting #1 will provide the
lowest resistance. Setting #10 will provide the highest resistance.
HANDLEBAR POSITION
The
HANDLEBAR(3)
can be placed on the hook in the
CONSOLE MONITOR POST(6),
refer to
illustration A. Or, you can place the
HANDLEBAR(3)
on the
HANDLEBAR HOLDER(52)
as shown in
illustration B.
PEDAL CAP ADJUSTMENT
The position of the
FOOT PEDAL(45)
can be adjusted. Refer to
the illustration. Pull the
FOOT PEDAL(45)
out from the two
bulges in the
PEDAL SUPPORT PLATE(5),
then lower or
raise the
FOOT PEDAL(45)
to the desired position. Lock the
FOOT PEDAL(45)
in position by pressing the adjustment holes
of the desired position onto the two bulges.
Refer to the numbers on the
FOOT PEDAL(45)
to make sure that
FOOT PEDAL(45)
are adjusted on the same position on both
sides.
Bulges
A.
B.
