16
17
HELP
1-800-488-6156 or 1-801-299-5555
www .orbitonline .com
Before returning this sprinkler timer to the store, contact
orbit
®
Technical service at: 1-800-488-6156, 1-801-299-
5555 .
LISTINGS
This Class B digital apparatus complies with Canadian
ICes-003 .
Disconnection : Type 1Y
Normal Pollution situation .
TRADEMARk NOTICE
WaterMaster
®
is a registered trademark of orbit
®
Irrigation Products, Inc . The information in this manual
is primarily intended for the user who will establish
a watering schedule and enter that schedule into the
sprinkler timer . This product is intended to be used as an
automatic sprinkler timer for activating 24 VAC irrigation
valves, as described in this manual .
WARRANTY AND STATEMENT
orbit
®
Irrigation Products, Inc . warrants to its customers
that its products will be free from defects in materials
and workmanship for a period of six years from the date
of purchase .
We will replace, free of charge, the defective part or
parts found to be defective under normal use and service
for a period of up to six years after purchase (proof of
purchase required) .
We reserve the right to inspect the defective part prior to
replacement .
orbit
®
Irrigation Products, Inc . will not be responsible for
consequential or incidental cost or damage caused by
the product failure . orbit
®
liability under this warranty is
limited solely to the replacement or repair of defective
parts .
To exercise your warranty, return the unit to your dealer
with a copy of the sales receipt .
This device complies with Part 15 of the FCC Rules .
operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation .
PROBLEM
POSSIBLE CAuSE
one or more valves do
not turn on
1 . Faulty solenoid connection
2 . Wire damaged or severed
3 . Flow control stem screwed down, shutting valve off
4 . Programming is incorrect
stations turn on when
they are not supposed
to
1 . Water pressure is too high
2 . More than one start time is programmed
3 . AM/PM is incorrect
4 . B program activated
one station is stuck on
and will not shut off
1 . Faulty valve
2 . Particles of dirt or debris stuck in valve
3 . Valve diaphragm faulty
All valves do not turn on
1 . Transformer defective or not connected
2 . Programming is incorrect
Timer will not power up
1 . Transformer not plugged into a working outlet
Valves continue to turn
on and off when they
are not programmed
1 . More than one start time is programmed with overlapping schedules
2 . excessive pressure
3 . B program activate
Troubleshooting
