Orbit Merret OMX 103UNI, User Manual

Page: 91 / 96

USER MANUAL OMX 103UNI | 91
12. TECHNICAL DATA
ANALOGUE OUTPUTS
No. of outputs 1 to 4
Type isolated, configurable with16 bit D/A converter,
type and range are selectable in the menu
Non-linearity 0,1 % of FS
TC 15 ppm/°C
Speed response to change of value < 1 ms
Voltage ranges 0…2/5/10 V, ±10 V
Current ranges 0…5/20 mA/4…20 mA
- compensation of leads' resist. up to 600 Ω
EXCITATION
Fixed voltage 24 VDC/max. 1 W, isolated
POWER SUPPLY
Options 10…30 V AC/DC, max. 5 VA, PF ≥ 0,4,
I
STP
< 40 A/1 ms, isolated
- fuse inside (T 4000 mA)
80…250 V AC/DC, max. 5 VA, PF ≥ 0,4,
I
STP
< 40 A/1 ms, isolated
- fuse inside (T 630 mA)
MECHANICAL PROPERTIES
Material PA 66, incombustible UL 94 V-I, blue
Dimensions 113 x 98 x 35 mm
Installation to DIN rail 35 mm wide
OPERATING CONDITIONS
Connection connector terminal board, conductor cross-section
<1,5 mm2 /<2,5 mm2
Stabilisation period within 5 minutes after power-on
Operating temp. -20°…60°C
Storage temp. -20°…85°C
Protection IP20
Construction safety class I
Overvoltage cat. EN 61010-1, A2
Dielectric strength 4 kVAC over 1 min between supply and input 4 kVAC
over 1 min. between supply and data/analogue
output
4 kVAC over 1 min. between input and relay output
2,5 kVAC over 1 min. between input and data/
analogue output
2,5 kVAC over 1 min. between inputs
Insulation resist. for pollution degree II, measurement cat. III power
supply > 600 V (BI), 300 V (DI)
Input/Output > 600 V (BI), 300 V (DI)
EMC EN 61326-1
Seismic resistance IEC 980: 1993, par. 6
BI - Basic isolation, DI - Double Isolation