Orbit Merret OMX 103UNI, User Manual

Page: 16 / 96

16 | USER MANUAL OMX 103UNI
4. DEVICE SETTING
■
Symbols used in this user manual
DC PM DU
OHM RTD T/C
indicates settings for the given type of instrument
DEF
default settings
2
8
6
a taller and flashing digit indicates which position is being edited
MIN
inverted triangle indicates a menu item which can be included into USER menu
CON.
broken line indicates a dynamic menu item, i.e. it is available only in particular selection/version
press both keys simultaneously
2s
press both keys simultaneously for more than 2 seconds
if this key is pressed, the newly set parameter will NOT be stored
if this key is pressed, the newly set parameter WILL be stored

30
continues on page 30 (go to page 30)
■
Decimal point and the negative sign
Decimal point
Position of the decimal point is edited by key When the highest decade is exceeded, the entire display starts
to flash. Position is then determined by pressing the key.
Negative sign
Setting of the negative sign is performed by key on the higher decade. When editing this item, figures change
in a numeric sequence 0, 1, …, 9, „-“, 0, 1