6
ASSEMBLY INSTRUCTIONS
NOTE: Be careful not to damage the PULSE SENSOR WIRES(73,74) while doing assembly
STEP 8 to STEP 10.
STEP 8: Attach the HANDRAIL(70) onto the SEAT CARRIAGE(64) with BUTTON HEAD BOLTS
(M8x12mm)(114).
STEP 9: Attach the SEAT(68) onto the SEAT CARRIAGE(64) with ROUND HEAD BOLTS(M6x15mm)(95).
Attach the BACK CUSHION(69) onto the SEAT CARRIAGE(64) with ROUND HEAD BOLTS
(M6x30mm)(96).
STEP 10: Turn the knob of the SPRING PIN(67) counterclockwise and lock the knob in the release position,
refer to the insert drawing. Slide the SEAT CARRIAGE ASSEMBLY(64) onto the RAIL(52).
Press the RAIL CAP(55) into the back end of the RAIL(52). Insert the STOPPER BOLT(54) through
the RAIL(52) and RAIL CAP(55) to bolt them together with the STOPPER(53). Please verify that
the other STOPPER BOLT(54) at the front end of RAIL(52) was assembled at the factory.
Summary of Contents for T6610N
Page 38: ...37 ...
