Orbit Fitness T6610N, Owner'S Manual

Page: 32 / 40

31
“ C
ONSOLE
I
NSTRUCTIONS –
U
SER
S
ETTING
P
ROGRAM (P13 ~ P16) ”
“ B. SET THE DESIRED TIME or DESIRED DISTANCE
To avoid the user to select TIME and DISTANCE in the same program to confuse the user couldn’t distinguish
which one (TIME or DISTANCE) as the first priority. User could only select TIME or DISTANCE in the same
program, one at the time.
If you would like to select TIME value, not
DISTANCE value:
UP or DOWN
button:
a.
After pressing the
ENTER
button to enter into
USER
MODE PROGRAM (P13 ~ P16)
, the TIME
function mode will appear with the display flashing
“0:00”.
b.
Use
UP or DOWN
buttons to set the desired TIME
(1:00 TO 99:00; 1 MINUTE INCREMENT)
NOTE for TIME:

Count Up: If a target time was not selected, TIME
will count up from 0:00 to maximum 99:59 minutes

Count Down: If you have set the target time, the
console will count down from that selected target
time down to 0:00.
If you would like to select DISTANCE value, not
TIME value:
ENTER
button and then
UP or DOWN
button:
a. After pressing the
ENTER
button to enter into
USER
MODE PROGRAM (P13 ~ P16)
, the TIME
function mode will appear with the display flashing
“0:00”.
b. Press the
ENTER
button again, the DISTANCE
function mode will then appear with the display
flashing “0.0”.
c. Use
UP or DOWN
buttons to set the desired
DISTANCE (1 TO 999KM/MILE; 1 KM/MILE
INCREMENT)
NOTE for DISTANCE:

Count Up: If a target distance was not selected, this
would measure the total distance from 0:00 to 999
km/mile

Count Down: If you have set the target distance, the
console will count down from the selected target
time down to 0.
“ C. SET THE DESIRED CALORIES and YOUR AGE ”
ENTER
button and then
UP or DOWN
button:
a. Press
ENTER
button to confirm TIME or DISTANCE value and enter the mode to set the
CALORIES.
b. Use
UP or DOWN
buttons to set the desired CALORIES (10 TO 9990KCAL; 10 KCAL
INCREMENT).
NOTE for CALORIES:

Count Up: If target calories was not selected, this would measure total calories burned during exercise

Count Down: If you have set the preference value of calories, the console will count down from that selected
value down to 0.