Orbit Fitness T6610N, Owner'S Manual

Page: 17 / 40

16
“ C
ONSOLE
I
NSTRUCTIONS –
M
ANUAL
P
ROGRAM (P1) ”
“ C. SET THE DESIRED CALORIES and YOUR AGE ”
1. ENTER
button and then
UP or DOWN
button:
a. Press
ENTER
button to confirm TIME or DISTANCE value and enter the mode to set the
CALORIES
b. Use
UP or DOWN
buttons to set the desired CALORIES (10 TO 9990KCAL; 10 KCAL
INCREMENT)
NOTE for CALORIES:

Count Up: If target calories was not selected, this would measure total calories burned during exercise

Count Down: If you have set the preference value of calories, the console will count down from that selected
value down to 0
2. ENTER
button and then
UP or DOWN
button:
a. Press
ENTER
button to confirm the CALORIES value and enter the mode to set the AGE
b. Use
UP or DOWN
buttons to set your AGE (10 TO 99 YEARS OLD; 1 YEAR OLD
INCREMENT)
NOTE for AGE:
NOTE : Although the console allows input for ages beginning at 10 years old, the product is not recommended
for children’s use
“ D. START EXERCISE ”
START/ PAUSE
button: Press
START/ PAUSE
to begin exercise. “ START ” would then appear on the screen
“ E. DURING WORKOUT, ALWAYS MONITOR YOUR CURRENT HEART RATE STATUS ”
NOTE for HEART RATE:

You must place both of your hands on the Pulse Sensors located on the Seat Handlebar .
Your pulse will be displayed approximately few seconds after the heart symbol “ ” is
displayed

If you do not place your hands correctly and a few seconds pass without a pulse input, the console will turn off the
pulse circuit. The console will then display an error message “P”. Place your hands back on the Pulse Sensors
correctly, the pulse readout will appear again