2-20
INSTALLATION
ORBAN MODEL 8382
“stereophonic mode” (corresponding to 8382 stereo mode) with these bits in the
pattern “0100.”
The 8382 can also emit these status bits at its digital output to control down-
stream equipment.
A)
Navigate to
S
ETUP
/
IO
C
ALIB
/
D
IG
O
UT
C
ALIB
and set the
D
IGITAL
F
ORMAT
to AES.
SPDIF cannot be used to handle status bits.
B)
To enable the 8382 to change its operating mode in response to AES status
bits received at its AES input:
a)
Navigate to
S
ETUP
/
N
ETWORK
&R
EMOTE
/
AES
S
TAT
B
ITS
.
b)
Set
I
N
>M
ODE
to
O
N
.
Unless you are sure that upstream equipment will correctly format these
bits, set
I
N
>M
ODE
to
O
FF
.
c)
Make sure that the equipment driving the 8382 is formatting its output as
AES3. SPDIF will not work.
C)
To send “two-channel mode” and “stereophonic mode” bits indicating the
8382's current operating mode, set
M
ODE
>O
UT
to
O
N
.
If this parameter is set to
O
FF
, then the 8382 will output “0000” (“mode
not indicated’). This is probably the safest available mode if you are un-
certain whether downstream equipment can respond appropriately to
these bits.
21.
Set the Processing Delay (optional).
[20 ms], [30 fps], [29.97 fps], [25 fps], [24 fps]
OPTIMOD-TV can add time delay to make its input/output delay exactly one
frame, using a variety of different standards. The selections are
M
INIMUM
(de-
pends on processing structure in use; typically between 20 and 23 ms), 30 fps,
29.97 fps (NTSC color video), 25 fps (most PAL video), and 24 fps (film).
Navigate to
S
ETUP
/
I/O
C
ALIB
/
D
IG
O
UT
C
ALIB
/
P
ROC
D
ELAY
and set the delay as
required.
22.
Set the main display mode (optional).
You can choose how the main display indicates on-air operating parameters by
navigating to
S
ETUP
/
S
HOW
D
ATE
. Choose
Y
ES
to make the display toggle auto-
matically once every two seconds, displaying the largest range of information.
Choose
N
O
to make the display static, showing the time, the on-air preset, the
active input, and whether the stereo or dual-mono mode is active.
The following material provides detailed instructions on how to set up the 8382. If
QUICK SETUP does not fully address your setup needs or if you wish to customize
your system beyond those provided with QUICK SETUP, then you may need the addi-
tional information in the sections below. However, for most users, this material is
Summary of Contents for Optimod-TV 8382
