background image

1-20 

 INTRODUCTION 

ORBAN MODEL 8382 

 

 

Simply take or ship your Orban products prepaid to our service department. Be sure 
to include a copy of your sales slip as proof of purchase date. We will not repair 
transit damage under the no-charge terms of this warranty. Orban will pay return 
shipping. (See 

Technical Support

 on page 5-13.) 

No other warranty, written or oral, is authorized for Orban Products. 

This warranty gives you specific legal rights and you may have other rights that vary 
from state to state. Some states do not allow the exclusion of limitations of inciden-
tal or consequential damages or limitations on how long an implied warranty lasts, 
so the above exclusions and limitations may not apply to you. 

INTERNATIONAL WARRANTY 

Orban warrants Orban products against evident defects in material and workman-
ship for a period of two years from the date of original purchase for use. This war-
ranty does not cover damage resulting from misuse or abuse, or lack of reasonable 
care, or inadequate repairs performed by unauthorized service centers. Performance 
of repairs or replacements under this warranty is subject to submission of this War-
ranty/Registration Card, completed and signed by the dealer on the day of purchase, 
and the sales slip. Shipment of the defective item is for repair under this warranty 
will be at the customer’s own risk and expense. This warranty is valid for the original 
purchaser only.  

EXTENDED WARRANTY 

Any time during the initial two-year Warranty period (but not thereafter), you may 
purchase a three-year extension to the Warranty (yielding a total Warranty period 
of five years) by remitting to Orban ten percent of the gross purchase price of your 
Orban product. This offer applies only to new Orban products purchased from an 
authorized Orban Dealer. To accept the extended five-year warranty, please sign and 
date below and fax this copy along with a copy of your original invoice (showing 
date of purchase) to Gareth Paredes at (510) 351-0500. 

I ACCEPT THE EXTENDED FIVE-YEAR WARRANTY  

 

__________________________________________________________________________  

                         
DATE______________________________________________________________________ 

MODEL NUMBER: 8382 

SERIAL NUMBER____________________________________________________________ 

 

Summary of Contents for Optimod-TV 8382





















































































































































































































































Reviews: