Orban OPTIMOD-FM 8600, Operating Manual

Page: 269 / 397

OPTIMOD-FM DIGITAL OPERATION
3-89
•
If the connection is successful, a dialog bubble will appear on the top left
hand corner of the screen verifying your connection.
•
If an Enter Passcode dialog box appears, enter a valid passcode and the 8600
PC Remote software will initiate a connection to the 8600 unit.
A window will appear saying, “Connecting to the 8600.” A few moments later, a
new message will appear: “Please Wait. Updating Local Files.”
When run, the Orban PC Remote software installer makes copies of all 8600 fac-
tory preset files on your local hard drive. The PC Remote software reads these
files to speed up its initialization. If any of these files have been deleted or dam-
aged, the PC Remote software will refresh them by downloading them from the
8600. If the PC Remote software needs to do this, it can substantially increase the
time required for the software to initialize, particularly through a slow modem
connection.
All communications between your Optimod and PC Remote are encrypted and all
transient files that PC Remote writes to your computer’s hard drive are also en-
crypted.
When this download is finished, the main meters will appear.
•
A wheel mouse is the quickest and easiest interface to use; you will rarely (if
ever) have to use the keyboard.
•
The help box at the bottom of the screen always presents a short help mes-
sage for the function you have selected.
To modify a control setting:
A) Choose
P
ROCESSING
P
ARAMETERS
from the
E
DIT
menu.
B) Select menu tabs for Less-More, Stereo Enhancer, and EQ to access Basic Modi-
fy controls. All other menu tabs contain Full or Advanced Modify controls.
You can reset any Basic Modify Control without losing
L
ESS
-M
ORE
func-
tionality; Full and Advanced modify control adjustments will cause
L
ESS
-
M
ORE
to be grayed-out.
•
To set a control, click it (it will become highlighted) and then adjust it by
dragging it with the mouse or moving the wheel on the mouse.
•
You can also use the
←
and
→
keys on the numeric keypad to adjust any
control.
To recall a preset:
A) Choose
R
ECALL
P
RESET
from the
F
ILE
menu to bring up the
R
ECALL
P
RESET
F
ILE
dialog box.
B) Click the desired preset within the dialog box to select it.