Orban OPTIMOD-FM 8600, Operating Manual

Page: 120 / 397

2-60
INSTALLATION ORBAN MODEL 8600
The file “8600_P1_Gregg.txt” contains:
RP GREGG [PASSWORD]
disconnect
The file “8600_P2_GreggOpen.cmd” contains:
plink -raw -P 23 123.45.67.89 < 8600_P2_GreggOpen.txt
The file “8600_P2_GreggOpen.txt” contains
RP GREGG OPEN [PASSWORD]
disconnect
Automated Control Using Netcat
Only one utility is required to use this method: netcat.exe. This is available as a free
download. Google “netcat.”
This method is scripted with a .cmd file and calls a .txt file.
•
The .cmd file calls netcat.exe to make the network connection between the com-
puter executing netcat.exe and 8600, and specifies the .txt file to use.
•
The .txt file contains the 8600 commands.
The following two examples recall the presets
GREGG
and
GREGG OPEN
respec-
tively.
The file “8600_P1_Gregg.cmd” contains:
nc.exe -v -n -w 1 123.45.67.89 23 < 8600_P1_Gregg.txt
The file “8600_P1_Gregg.txt” contains:
RP GREGG [PASSWORD]
disconnect
The file “8600_P2_GreggOpen.cmd” contains:
nc.exe -v -n -w 1 123.45.67.89 23 < 8600_P2_GreggOpen.txt
The file “8600_P2_GreggOpen.txt” contains:
RP GREGG OPEN [PASSWORD]
disconnect
Remote Control Interface Programming
[Skip this section if you do not wish to program the opto-isolated GPI remote control
interface at this time.]