background image

Oracle Talari T5200 | Hardware Guide 

Copyright © 2019, 2007 Oracle and/or its affiliates. All rights reserved. 

This software and related documentation are provided under a license agreement containing restrictions 
on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in 
your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, 
modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any 
means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for 
interoperability, is prohibited. 

The information contained herein is subject to change without notice and is not warranted to be error-free. 
If you find any errors, please report them to us in writing. 

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it 
on behalf of the U.S. Government, the following notice is applicable: 

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated 
software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government 
end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation 
and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and 
adaptation of the programs, including any operating system, integrated software, any programs installed 
on the hardware, and/or documentation, shall be subject to license terms and license restrictions 
applicable to the programs. No other rights are granted to the U.S. Government. 

This software or hardware is developed for general use in a variety of information management 
applications. It is not developed or intended for use in any inherently dangerous applications, including 
applications that may create a risk of personal injury. If you use this software or hardware in 
dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, 
redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim 
any liability for any damages caused by use of this software or hardware in dangerous applications. 

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be 
trademarks of their respective owners. 

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks 
are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, 
Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced 
Micro Devices. UNIX is a registered trademark of The Open Group. Windows® 7 and Windows® XP are 
trademarks or registered trademarks of Microsoft Corporation. 

This software or hardware and documentation may provide access to or information on content, products, 
and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly 
disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle 
Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your 
access to or use of third-party content, products, or services, except as set forth in an applicable 
agreement between you and Oracle. 

 

 

Summary of Contents for Talari T5200
























Reviews: