Oracle Talari T5200 | Hardware Guide
Powering Up the Appliance
Checklist for Power Up
Power up the T5200 by performing the following steps:
5.
Determine the IP address for the Ethernet management interface.
6.
Confirm that the chassis is securely mounted.
7.
Confirm that the power and Ethernet cables are connected.
The appliance powers up automatically when first plugged in.
If you encounter problems when you power up the appliance, please see the
Troubleshooting
section of this document.
Configuring the Talari Appliance
The T5200 ships with a default management IP address of 192.168.0.2/30. In order to
access your appliance remotely, you must first connect to it directly via the Management
Auxiliary interface (AUX) and configure a management IP address for the appliance.
Figure 15: Configuring the Appliance
Use an Ethernet cable to connect from a PC to the interface labeled AUX, then refer to the
Talari Appliance T5200 Getting Started Guide (included in the shipping box) or to the Talari
Appliance Quick Start Guide for instructions on how to access and use the web console to
configure the management IP address.
1 8
