114
Sun Datacenter InfiniBand Switch 648 Installation Guide • May 2010
7. Repeat
for the second cable at CXP connector 0B.
8. Curve the cable to the left through the branches of the cable tree.
Caution –
Do not force a bend radius of less than 5 inches (127 mm). Any bend
tighter than this damages the inner fibers of the cable, rendering it useless.
9. Place the cable over the cable curve and move the cable in toward the rack.
10. Repeat
for the third cable at CXP connector 10B.
11. Curve the cable to the right through the branches of the cable tree, next to the
cable already there.
12. Place the cable over the cable curve and move the cable against the cable
already there.
13. Repeat
for the fourth cable at CXP connector 1B.
14. Curve the cable to the left through the branches of the cable tree, next to the
cable already there.
