Oracle SPARC T7-4, Installation Manual

Page: 35 / 90

Determine Correct Rackmount Hardware
Determine Correct Rackmount Hardware
1. Ensure that the rack is stabilized.
See “Stabilize the Rack” on page 32 .
2. Determine the hardware needed for your rack installation.
Rack Type Fastener Bags Required
Square hole SCREW, SEMS, M6 X 16
CAGE NUTS, M6
Round hole (10-32) with corner bezel SCREW, SEMS, 10-32 X 10
SCREW, FLAT HEAD, M4 X 10
Round hole (M6) with corner bezel SCREW, SEMS, M6 X 12
SCREW, FLAT HEAD, M4 X 10
Round hole (10-32) inside installation SCREW, SHOULDER, 10-32
SCREW, FLAT HEAD, M4 X 10
Round hole (M6) inside installation SCREW, SEMS, M6 X 12
SCREW, FLAT HEAD, M4 X 10
Note -
Some of the fastener bags that are included in the kit are not required to install this
server.
3. Mark the rackmounting location.
See “Mark the Rackmounting Location” on page 36 .
Related Information
■
“Rack Compatibility” on page 30
■
“Installing the Rackmount Kit” on page 33
■
“Mark the Rackmounting Location” on page 36
■
“Install the Shelf Rails” on page 37
Installing the Server 35