Oracle SPARC T7-4, Installation Manual

Page: 37 / 90

Install the Shelf Rails
■
“Installing the Rackmount Kit” on page 33
■
“Determine Correct Rackmount Hardware” on page 35
■
“Install the Shelf Rails” on page 37
Install the Shelf Rails
1. Place the left shelf rail in the marked location.
Note -
The shelf rails are marked FRONT LEFT and FRONT RIGHT (as viewed from the front
of the server). An up arrow indicates proper orientation.
2. Secure the rear shelf rail bracket at the top and bottom holes using two Torx T30
screws.
Installing the Server 37