Oracle Netra SPARC, Administration Manual

Page: 47 / 108

View All OpenBoot Parameters
View All OpenBoot Parameters
1. View all of the OpenBoot parameters using one of these methods:
■
From the OpenBoot prompt, type:
printenv
■
From Oracle Solaris, type:
eeprom
2. View the value for an individual OpenBoot parameter using one of these
methods:
■
From the OpenBoot prompt, type:
printenv
parameter
where parameter is a valid OpenBoot parameter.
■
From Oracle Solaris, type:
eeprom
parameter
where parameter is a valid OpenBoot parameter.
Related Information
■
“OpenBoot Configuration Parameters” on page 47
■
“
printenv
Output” on page 48
OpenBoot Configuration Parameters
Parameter Default Value Description
auto-boot-on-error? false
Controls whether or not the host attempts to boot after POST detects a
nonrecoverable error.
■
false
– Host does not attempt to boot and stops at the
ok
prompt.
■
true
– Host automatically attempts to boot.
auto-boot? true
Controls whether or not the host automatically boots after a system reset or
when the power is turned on.
■
true
– Host automatically attempts to boot from the devices specified in
boot-device
.
■
false
– Host does not attempt to boot and stops at the
ok
prompt.
boot-command boot
Specifies the command to be executed when
auto-boot?
is
true
. Valid boot
commands:
■
boot
– Boots kernel from devices specified in
boot-device
.
■
boot net
– Boots kernel from the network.
■
boot cdrom
– Boots kernel from the CDROM.
Configuring Boot and Restart Behavior 47