Oracle Netra SPARC Administration Manual Download

Page: 33 / 108

Booting and Shutting Down the OS

These topics include instructions for booting and shutting down the OS. Instructions for

obtaining the OpenBoot prompt are inclucded, because some of these procedures are performed

at that prompt.

■

“Booting and Shutting Down Oracle Solaris” on page 33

■

“Obtaining the OpenBoot Prompt” on page 38

Related Information

■

“Controlling the Server” on page 23

Booting and Shutting Down Oracle Solaris

There are several ways to boot and shut down the OS.

Description

Links

Learn about the boot sequence.

“Boot Sequence” on page 34

Boot a server that is configured to boot at power-on (the

default configuration) using Oracle ILOM.

“Boot the OS (Oracle ILOM)” on page 35

Boot a server that is at the OpenBoot prompt.

“Boot the OS Manually (OpenBoot)” on page 35

Shut down the OS using an Oracle Solaris command.

Related Information

■

“Powering the Server On and Off” on page 23

Booting and Shutting Down the OS

Summary of Contents for Netra SPARC













































































































Search results

Summary of Contents for Netra SPARC

Reviews:

Related manuals for Netra SPARC

Brands by name

Popular brands

Oracle Netra SPARC, Administration Manual

Search results

Summary of Contents for Netra SPARC

Reviews:

Related manuals for Netra SPARC

Brands by name

Popular brands