manualshive.com logo in svg

Oracle Netra SPARC, Administration Manual

Share
Download
Oracle Netra SPARC Administration Manual Download Page 42

Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)

This setting configures the host to stop at the OpenBoot prompt instead of automatically

booting the preinstalled OS.

c.   

Click Save.

Note - 

You have 10 minutes to perform the next step. After 10 minutes, the state automatically

returns to normal.

4.

In the left navigation panel, click Host Management > Power Control.

5.

Select Reset from the pull-down menu, and click Save.

6.

In the left navigation panel, click Remote Control > Redirection.

7.

Select Use Serial Redirection, and click Launch Remote Console.

As the host resets, messages are displayed in the serial console. The OpenBoot prompt is

displayed when the reset activity completes.

Related Information

■

“OpenBoot Overview” on page 13

■

“Configuring Boot and Restart Behavior” on page 43

■

“Obtain the OpenBoot Prompt (Oracle Solaris)” on page 39

■

“Obtain the OpenBoot Prompt (Oracle ILOM CLI)” on page 40

42

SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016

Summary of Contents for Netra SPARC













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands