manualshive.com logo in svg

Oracle Netra SPARC, Administration Manual

Share
Download
Oracle Netra SPARC Administration Manual Download Page 38

Obtaining the OpenBoot Prompt

 
SPARC T5-2, No Keyboard
Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights 
reserved.
OpenBoot 4.33.1, 32256 MB memory available, Serial #xxxxxxxx.
Ethernet address 0:xx:xx:xx:xx:xx, Host ID: xxxxxxxx.
{0} ok

Related Information

■

“Shut Down the OS (

init

 Command)” on page 36

Obtaining the OpenBoot Prompt

There are several ways to reach the OpenBoot prompt (

ok

).

■

“OpenBoot Prompt” on page 38

■

“Obtain the OpenBoot Prompt (Oracle Solaris)” on page 39

■

“Obtain the OpenBoot Prompt (Oracle ILOM CLI)” on page 40

■

“Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)” on page 41

Related Information

■

“Log In to Oracle ILOM” on page 17

■

“Booting and Shutting Down Oracle Solaris” on page 33

OpenBoot Prompt

When the host is powered on but the OS is not booted, you communicate with the OpenBoot

firmware. OpenBoot firmware displays 

ok

 as its prompt.

This table lists the common tasks that are performed at the 

ok

 prompt:

Task

For More Information

Boot the host.

“Boot the OS Manually (OpenBoot)” on page 35

Configure OpenBoot parameters.

“View All OpenBoot Parameters” on page 47

38

SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016

Summary of Contents for Netra SPARC













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands