manualshive.com logo in svg

Oracle Netra SPARC, Administration Manual

Share
Download
Oracle Netra SPARC Administration Manual Download Page 41

Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)

4.

Switch communication to the host.

-> 

start /HOST/console

Are you sure you want to start /HOST/console (y/n)? 

y

Serial console started. To stop, type #.

The server might take several minutes to complete POST and then displays the OpenBoot

prompt.

Related Information

■

“OpenBoot Overview” on page 13

■

“Configuring Boot and Restart Behavior” on page 43

■

“Obtain the OpenBoot Prompt (Oracle Solaris)” on page 39

■

“Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)” on page 41

Obtain the OpenBoot Prompt (Oracle ILOM Web

Interface)

Use this procedure when the host is powered down, and you want to get to the 

ok

 prompt when

the host is powered on.

1.

Log in to Oracle ILOM.

See 

“Log In to Oracle ILOM” on page 17

.

Note - 

If you have a modular system, ensure that you are managing the desired server module.

2.

In the Oracle ILOM web interface, in the left navigation pane, select Host

Management > Host Boot Mode.

The Host Boot Mode page is displayed.

3.

Apply these changes to the Host Boot Mode Settings:

a.   

For State, select: Reset NVRAM

This setting applies a one-time NVRAM (OpenBoot) change based on the script setting,

then resets the NVRAM to default settings on the next host reset.

b.   

For Script, type: 

setenv auto-boot? false

Booting and Shutting Down the OS

41

Summary of Contents for Netra SPARC













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands