Oracle Netra SPARC, Administration Manual

Page: 37 / 108

Shut Down the OS (
shutdown
Command)
Sep 21 13:31:37 The system is down. Shutdown took 23 seconds.
syncing file systems... done
Program terminated
SUN BLADE 6000 MODULAR SYSTEM / SPARC T5-1B, No Keyboard
Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.35. 63 GB memory available, Serial #xxxxxxxx.
Ethernet address 0:xx:xx:xx:xx:xx, Host ID: xxxxxxxx.
{0} ok
Related Information
■
“Shut Down the OS (
shutdown
Command)” on page 37
Shut Down the OS (
shutdown
Command)
The
shutdown
command sends a warning message, then terminates active processes on a
system to reach a specified run level. Specifying run level
0
shuts down the OS and displays the
OpenBoot prompt.
1. Log in to Oracle Solaris as a user with root privileges.
2.
Shut down the OS.
In this example, these command options shut down the OS to the OpenBoot prompt:
■
-g0
– Specifies a grace period of 0 seconds.
■
-i0
– Specifies the run level 0, which is equivalent to the
init 0
command.
■
-y
– Pre-answers the confirmation question so that the command runs without user
intervention.
Note -
This document applies to several server and server module products. The following
example is based on the SPARC T5-2 server. Your output might vary from the examples based
on your product.
# shutdown -g0 -i0 -y
# svc.startd: The system is coming down. Please wait.
svc.startd: 106 system services are now being stopped.
Sep 12 17:52:11 systemA syslogd: going down on signal 15
svc.startd: The system is down.
syncing file systems...done
Program terminated
Booting and Shutting Down the OS 37