Ethernet Ports
No. Cable Port or Expansion Slot
Description
Note -
This port does not support network connections.
Related Information
■
■
“Connect the Power Cords” on page 63
Ethernet Ports
The storage server has four RJ-45 10-Gigabit Ethernet (10GbE) network connectors, labeled
NET 3, NET 2, NET 1, and NET 0, from left to right on the storage server rear panel. Use these
ports to connect the storage server to the network as described in the Oracle Exadata cabling
instructions.
The LEDs located above each NET port are Link/Activity (left) and Speed (right) indicators for
each port. The following table lists the Ethernet transfer rates and the Speed LED color.
Connection Type
IEEE Terminology
Speed LED Color
Transfer Rate
Fast Ethernet
100BASE-TX
Off
100 Mbits/sec
Gigabit Ethernet
1000BASE-T
Amber
1,000 Mbits/sec
10 Gigabit Ethernet
10GBASE-T
Green
10,000 Mbits/sec
Related Information
■
“Rear Cable Connections and Ports” on page 61
■
“Connect the Power Cords” on page 63
Connect the Power Cords
Caution -
Do not connect the power cords to the storage server until the you have made the
service processor (SP) and host networking connections. The storage server includes an SP that
is used to configure and boot the host system. Connecting the SP and host networking cables
first enables you to properly configure the host system and view SP messages.
Cabling the Storage Server
63
Summary of Contents for EXADATA X6-2
