Oracle EXADATA X6-2, Installation Manual

Page: 38 / 72

Install the Storage Server Into the Slide-Rail Assemblies
■
“Mark the Rackmount Location” on page 31
■
“Install the Storage Server Into the Slide-Rail Assemblies” on page 38
Install the Storage Server Into the Slide-Rail Assemblies
Use this procedure to install the storage server chassis, with mounting brackets, into the slide-
rail assemblies that are mounted to the rack.
Caution -
Personal Injury or Equipment Damage
: This procedure requires a minimum of
two people because of the weight of the storage server.
Caution -
To prevent the rack from tipping during equipment installation, extend your rack's
anti-tilt bar.
1. Push the slide-rails into the slide-rail assemblies in the rack as far as possible.
2. Position the storage server so that the rear ends of the mounting brackets are
aligned with the slide-rail assemblies that are mounted in the rack.
38 Oracle Exadata Storage Server X6-2 Extreme Flash Installation Guide • July 2018