Oracle Exadata Storage Server X7-2 EF, Installation Manual

Page: 76 / 90

Reset the Service Processor From the Server Back Panel
■
From the Oracle ILOM command-line interface (CLI), type the command:
reset /SP
■
From the Oracle ILOM web interface, click
Administration
→
Maintenance
→
Reset SP
.
Note - Resetting the Oracle ILOM SP disconnects your current Oracle ILOM session. Log in
again to resume working in Oracle ILOM.
Reset the Service Processor From the Server
Back Panel
If the Oracle ILOM SP is hung and you cannot reset it using the Oracle ILOM web interface or
the Oracle ILOM CLI command, use the following procedure to reset the SP from the server
back panel.
1. Using a stylus, press the Reset SP pinhole button located on the server back
panel.
Callout Description
1 SP Reset pinhole button
2. After the SP reboots, log in again to continue working in Oracle ILOM.
76 Oracle Exadata Storage Server X7-2 EF and HC Installation Guide • November 2018