Oracle Exadata Storage Server X7-2 EF Installation Manual Download Page 48

Page: 48 / 90

Install the Cable Management Arm (Optional)

the server into the rack until the slide-rail locks (on the front of the mounting

brackets) engage the slide-rail assemblies with an audible click.

Caution -

Before you install the optional cable management arm, verify that the storage server

is securely mounted in the rack and that the slide-rail locks are engaged with the mounting

brackets.

Related Information

■

“Install the Cable Management Arm (Optional)” on page 48

Install the Cable Management Arm (Optional)

Follow this procedure to install the cable management arm (CMA), which you can use to

manage cables connected to the back of the storage server.

Oracle Exadata Storage Server X7-2 EF and HC Installation Guide • November 2018

Summary of Contents for Exadata Storage Server X7-2 EF



























































































Search results

Summary of Contents for Exadata Storage Server X7-2 EF

Reviews:

Related manuals for Exadata Storage Server X7-2 EF

Brands by name

Popular brands

Oracle Exadata Storage Server X7-2 EF, Installation Manual

Search results

Summary of Contents for Exadata Storage Server X7-2 EF

Reviews:

Related manuals for Exadata Storage Server X7-2 EF

Brands by name

Popular brands