Oracle Exadata Storage Server X7-2 EF Installation Manual Download Page 45

Page: 45 / 90

Attach the Slide-Rails

Starting with either the left or right side of the rack, align the back of the

slide-rail assembly against the inside of the back rack rail, and push until the

assembly locks into place with an audible click.

Align the front of the slide-rail assembly against the outside of the front rack rail,

and push until the assembly locks into place with an audible click.

Repeat Step 1 through Step 3 to attach the slide-rail assembly to the other side

of the rack.

Related Information

■

“Install Mounting Brackets on the Server” on page 39

Installing the Storage Server Into a Rack

Summary of Contents for Exadata Storage Server X7-2 EF



























































































Search results

Summary of Contents for Exadata Storage Server X7-2 EF

Reviews:

Related manuals for Exadata Storage Server X7-2 EF

Brands by name

Popular brands

Oracle Exadata Storage Server X7-2 EF, Installation Manual

Search results

Summary of Contents for Exadata Storage Server X7-2 EF

Reviews:

Related manuals for Exadata Storage Server X7-2 EF

Brands by name

Popular brands